MIC: Coarse gain select buttons. Highest number active. Silent Select

Pre-Set link for +48v.
 

REF LEVEL:
±10dB Line input.
 

LINE:Select with LED on.
PH:
Phase change Line or Mic.
TRIM: Fine adjust ±15dBs.
Post Line switch.
 

80Hz:12dB/octave H.P.F.

HF:
±15dB shelving, 6dB/octave.
 

MID:
Sweep 120-1k2Hz Q-0.8.
x10: 1k2-12kHz Q-0.8.
MID:±15dB control.
 

LF:
±15dB shelving,6dB/octave.
EQ: Equalizer in/out not H.P.F.

HOLD/REF: Limits module output to a preset reference within a gain range of up to 20dBs.  Addition Information  

A1:Jumper pre or post Fader.
A2:Post Fader only.
Cleanfeed select post Fade.
 

DUCK: Channel controlled from selected master duck. Disabled when selected as master.

PAN: Positions the signal in a stereo image. Unity gain in centre + 3dB at each end.
PGM: Assigns channel direct to Programme bus.

AUD: Assigns channel direct to Audition module 204.

SUB: Assigns channel direct to Sub-Group module 204.ON LED: Indicates channel is on, also status of Fader. Green fully off, Orange active.
ON SW: Enables VCA's. Can be pre-set to control remote stop/start, via opto-couplers.

PFL: Assigns the panned stereo image to monitor phones, meters or control-room loudspeakers. Remote cough switch activates PFL.

FADER: 100mm. movement.
Switch electronic can be pre-set to control stop/start.

Bargraph shows peak PFL level. +18dB -6dB from clip.
Insert points ,Ref @ 0dBm. 
Provides fully balanced send and return. 
PFL by default is disabled when Fader is opened.
Jumper override is provided. 

LINE 2: Selects from 2 balanced sources.
 

REF LEVEL:
L-R adjustable ±10dB.

MONO: 
L - Left to both channels.
R - Right to both channels.
L+R - Mono sum +6dB.
 

TRIM: Fine adjust ±15dBs.
Post Line switch.

HPF120Hz: 12dB/octave 
E.Q. OPTION BELOW

HF: ±15dB shelving,6dB/octave.
 

DEFAULT 270Hz: Mid Select.
270-550-860-1k1Hz Q 0.8 2k7-5k5-8k6-11kHz x10
 

MID:  ±15dB control

LF: ±15dB shelving,6dB/octave.
 

EQ: Equaliser in/out not H.P.F.
E.Q OPTION ABOVE

A1: Mono summation L+R, jumper select pre or post. Fader.
A2: Mono summation L+R, post only.

DUCK: As 401.

PAN: Pan/Balance, unity gain in centre.
All other switches and fader functions as 201, no inserts

Bargraph shows summation of PFL level peak reading.
+18dB 6dB below clip level.
EQUALISATION is OPTION
ON C202.
MID:±15dB control.

Remote PFL opto-coupler switch provided, for interface with automation systems.